Ceramic Coating Results
Real jobs by Isaac. These were completed on the Sunshine Coast; Brisbane jobs will be added here as they're done.
Black Porsche Cayenne
Problem: deep swirls from incorrect washing, plus mineral etching on the rear pillar where water pooled. Method: two-step correction, CarPro Cut on a microfibre pad then CarPro Reflect on an orange foam pad. The rear pillar was wet sanded from 1500 to 5000 grit, compounded and polished, then coated with Blask RX520. Time: 8am to 6pm. Result: about 95% defect removal with a deep, slick gloss.
Black Haval GT, Eumundi
Problem: about a year old, dealer detailed and coated, but the paint was already in poor shape. Method: correction and coating at the owner's home. Time: nine hours. Result: in Peter's words, "better than the Dealers handover".
Dark blue Subaru Liberty, Witta
Problem: swirls and scratches on thin, soft Subaru paint with little room for error. Method: a taped test section on the rear quarter to choose the pad and polish, then the same combination on every panel. Full car coated with Blask RX520. Result: swirls removed with strong gloss.
Snowy River SRC-21 caravan, Palmwoods
Problem: a few years old but sun-dulled and chalky. Method: rotary oxidation removal on the gelcoat, dual-action hologram removal, fine finishing polish, then two layers of Blask RX520 plus coating on checker plate, plastics, doors, aluminium trim and wheels. Result: a glossy, refined finish.
Nardo Grey Nissan Navara
Problem: the paint had lost its depth. Method: correction and coating. Result: metallic flake visible again.
More from recent jobs